1. Use our online application guides (below) if you aren't sure which product # to order.
2. Write down product numbers and quantities before you go to our online order center.
3. Click on the menu to the left to select a category and scroll down to the item needed.

Select an application guide below. (Use browser "Back" key to return here).

Online Application Guide - Filter Application Guide - Gear Lube Guide

AMSOIL lubricants are engineered to SAVE money -
take advantage of them

AMSOIL Ea Oil Filters have the best efficiency rating in the industry in accordance with industry standard ISO 4548-12 of 98.7 percent at 15 microns. By comparison, competitive filters containing conventional cellulose medias range from 40 to 80 percent efficiency.

AMSOIL EaO Filters have a far greater contaminant holding capacity than competing filter lines. When used in conjunction with AMSOIL synthetic motor oils in normal service, EaO Filters are guaranteed to remain effective for 25,000 miles or one year, whichever comes first.

AMSOIL Ea Oil Filters are guaranteed for 25,000 miles or one year, whichever comes first, when used in conjunction with AMSOIL Synthetic Motor Oil. AMSOIL recommends changing the oil filter at the time of oil change. If used in conjunction with AMSOIL Motor Oil that is being changed at intervals less than 25,000 miles, the EaO Filter should be changed at the same time. AMSOIL EaO Filters are not guaranteed for 25,000 miles when used with any oil other than AMSOIL Motor Oil and should be changed according to vehicle OEM recommendations.

For more details
See Pricing or Place an Order - ( Top Of Page )

AMSOIL Ea Air Filters represent a major breakthrough in filtration technology. The revolutionary nanofiber technology used in AMSOIL Ea Filters captures more dirt, holds more dirt and allows better air flow than conventional air filters. AMSOIL Ea Filters improve engine performance and help engines last longer. AMSOIL Ea Air Filters are the most efficient filters available to the car/light truck market. Ea Air Filters’ synthetic nanofiber media removes five times more dust than traditional cellulose filter media alone and 50 times more dust than wet gauze filter media. AMSOIL Ea Air Filters have a service life of 100,000 miles or four years, whichever comes first.

AMSOIL Ea Air Filters hold up to two and a half times more contaminants than cellulose air filters. Since the nanofibers in the media are so small there are more pores per square inch, allowing for higher dirt-holding capacity and lower pressure drop when compared to cellulose filter media alone. Thinner media fibers produce more uniform pore size distribution, improving the filter’s overall quality and ability to capture and retain particles. Testing shows that Ea Air Filters hold 15 times more contaminants than a wet gauze type filter.

In the last two years, AMSOIL has introduced more new products and made more technical advances than during any other period in the company’s storied 33-year history. AMSOIL now provides engine oils for nearly every application, multiple gear oils, greases, fuel additives and appearance products.

To offer a more wellrounded selection of automotive products, AMSOIL also offers high quality products from other manufacturers such as BOSCH. Recently, AMSOIL’s focus has been on the filtration market. The recently launched Ea Filter line includes the finest filtration products in the world for the auto/light truck market, and Donaldson covers the heavy-duty market. To complement the Ea line of filters, AMSOIL now offers WIX filters, allowing one-stop shopping for automotive customers. AMSOIL will carry over 700 WIX air, oil, fuel, racing and transmission filters for automotive and light truck applications.

The AMS-Oiler® is a high-tech oil pre-charger which puts an end to potential dry-engine starting. Typically, an engine that has sat for even a short period of time will operate relatively dry upon starting before oil is able to fully lubricate the system. The AMS-Oiler® operates as an engine oil reservoir, charged under pressure directly from the oil pump output during normal engine operation. Upon turning the ignition key to the on position, up to 160 cc’s (5.4 oz.) of oil are discharged from the reservoir to engine surfaces, building oil pressure and providing vital lubrication.

AMSOIL Foam Filter Oil has long provided users of AMSOIL air filters with a high level of air flow and superior particle removal. Now, five years of research, testing and development have yielded a new and improved Foam Filter Oil formulation. New AMSOIL High Tack Foam Filter Oil is a special blend of synthetic polymers that allows maximum air flow and increased particle removing efficiency and capacity. High Tack Foam Filter Oil stays in place throughout service life, resists washout from carburetor fogging and will not plug foam filter cells, while its new red color helps ensure even oil coverage across the entire filter.

AMSOIL offers premium air filters that utilize PowerCore™ filtration technology for Ford 6.0L Diesel PowerStroke™ and GM H2 Hummer 6.0L Vortec™ applications. The rugged structure of PowerCore™ filters features an innovative, layered, fluted filter media, which allows air to enter an open flute while forcing it out an adjacent flute, allowing only clean air into the engine. Dirty air is effectively filtered and cleaned in only one pass through the media.

Filters include:

• P603577 - PowerCore® Air Filter for Ford 6.0L Diesel Powerstroke™ Application
• PCFH2 - PowerCore® Air Filter for H2 Hummer 6.0L Vortec™ Application
• PCF73 - PowerCore® 7.3L PowerStroke Filter Replacement Cartridge
• P548070 - Freightliner M-2 - Primary Application
• P544432 - Freightliner M-2 - Secondary Application
• P606121 - John Deere 6020 Series - Primary (AL150288)
• P606119 - John Deere 6020 Series - Secondary, 4 Cylinder (AL119839)
• P606120 - John Deere 6020 Series - Secondary, 6 Cylinder (AL150285)
• FFK60 - Fuel Filter for Ford 6.0L Diesel Powerstroke™ Application
• EaO88 - Oil Filter for Ford 6.0L Diesel Powerstroke™ Application

Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Increases octane number up to seven points. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use. Performance Features:
* Improves performance * Maximizes power * Improves ignition * Helps fuel burn cleaner * Removes carbon deposits * Reduces engine knock * Improves responsiveness * Inhibits corrosion

It is difficult to drain all of the fuel from equipment before storage, and doing so would expose the system to other problems, including the formation of rust and corrosion on the bare metal in the tank and fuel system and the drying and cracking of gaskets and seals. Some fuels are pre-treated with oxidation inhibitors that allow them to be stored for short periods without forming excessive deposits, while other fuels have no inhibitors at all. AMSOIL Gasoline Stabilizer (AST) reduces the oxidation process that occurs when fuel is stored for extended periods, improving performance, extending equipment life and decreasing maintenance expenses. Treat rate is one ounce with every 2.5 gallons of fuel. One bottle treats 40 gallons.

Ideal for both fuel injected and carbureted systems. Dissolves and removes fuel system deposits and other contaminants for improved power, overall performance and fuel efficiency in gasoline engines. Ideal for both fuel injected and carbureted systems. Dissolves and removes fuel system deposits and other contaminants for improved power and overall performance in gasoline engines to maximize the fuel efficiency of your vehicle. Reduces PCV and EGR system deposits. Reduces exhaust emissions (tests show up to 90 percent reduction). Improves engine idle, response and starting. An initial clean-up dose of six ounces for ten gallons of gasoline restores up to 95 percent of an injector's original fuel flow. Periodic maintenance doses of one ounce for ten gallons of gasoline keep injectors and other fuel system components clean. Product Code: API

Lowers diesel fuel gel point by 20° to 30° F, depending on mix ratio. Improves the performance, fuel efficiency and longevity of diesel engines while reducing deposits, black smoke, emissions and injector wear. Prevents wear of injector pump. For use in heavy-duty diesel engines. (Such as Mack, Freightliner, and Peterbilt). 16-oz. bottle treats up to 100 gallons.

Performance Features:
* Improves fuel economy * Extends injector life * Increases fuel stability * Reduces emissions * Improves cold fuel flow * Improves cold start-ability * Controls injector wear * Compatible with AMSOIL Cetane Boost

Diesel Fuel Modifier improves combustion, fuel efficiency, cold-weather starting, power and performance. Cleans injectors, fuel screens, pumps and filters. Designed for use in cars and light duty trucks. 16-oz. bottle treats up to 40 gallons of fuel.

Performance Features:
* Improves fuel economy * Extends injector life * Increases fuel stability * Reduces emissions * Improves cold fuel flow * Improves cold start-ability * Controls injector wear * Compatible with AMSOIL Cetane Boost

Cetane Boost Diesel Fuel Additive improves combustion efficiency to increase power in diesel engines. Raises cetane three to seven numbers. Also improves low-temperature starting, fuel ignition quality and reliability. 16-oz. bottle treats up to 200 gallons of fuel. For use in any diesel-fueled engine.

Performance Features:
* Improves ignition quality * Improves low-temp starting * Reduces cranking time * Reduces emissions and smoke * Provides smoother, quieter operation * Increases efficiency * Compatible with AMSOIL Diesel Fuel Additive Concentrate

Offers superior film retention, providing long-term protection against corrosion and dry starts, extending engine life and reducing operating expenses. Its aerosol spray formulation offers easy and clean applications, while reaching more components and offering better distribution than straight motor oil. Two- and four-stroke recreational vehicles, hand held power equipment, small engines, construction and farm equipment are commonly operated seasonally or infrequently, then stored for long periods of time. During these periods of inactivity, and as a result of fluctuations in ambient temperatures, water vapor can form condensate within the engine. When this condensate comes into direct contact with steel and iron components, it forms surface corrosion on cylinder liners, piston rings, anti-friction bearings and steel/iron contact surfaces on rotational seals. Long periods of storage can also dry out cylinders, often resulting in permanent damage when the equipment is taken out of storage and dry started.

AMSOIL Fast Acting Engine Flush is made from a carefully selected blend of solvents and special cleaning agents that dissolve and disperse harmful engine deposits. When used as directed, it cleans and restores operating efficiency to valves, valve lifters, rocker arms, and pistons for improved horsepower, fuel economy, and performance. Use before changing oil.

Stop and go driving, prolonged periods of idling, short trips that don't allow your engine time to warm up, towing a trailer, the ingestion of airborne dirt, fuel dilution, water condensation, and oxidized oil will eventually cause the formation of sludge. When an engine gets dirty, even regular oil changes can't help restore its operating efficiency. Using AMSOIL Fast Acting Engine Flush when you change oil is an excellent way to guarantee your engine stays clean. It has special solvents and cleaning agents that act fast but gently to remove harmful deposits that can cost you money in excessive fuel consumption and mechanical repairs. AMSOIL Engine Flush is especially recommended for use before changing to AMSOIL Synthetic Motor Oils, assuring that these super premium long life oils provide the maximum protection and service life they are designed to deliver.

AMSOIL SEVERE GEAR® Synthetic Extreme Pressure (EP) Lubricants are premium grade lubricants specifically engineered for maximum performance in severe duty applications. These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL SEVERE GEAR® Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring. AMSOIL SEVERE GEAR® lubricants help prevent “thermal runaway” — a phenomenon caused by a lubricant’s inability to control friction and increased heat under high-stress conditions. By controlling thermal runaway, AMSOIL SEVERE GEAR® Synthetic EP Lubricants inhibit rapid lubricant degradation and component damage. Equipment runs better and lasts longer with AMSOIL SEVERE GEAR® Synthetic EP Lubricants.

These state-of-the-art AMSOIL formulations feature an exclusive blend of high viscosity, shear stable synthetic base oils and an extra treatment of high-performance additives. AMSOIL SEVERE GEAR® Synthetic EP Lubricants maintain their viscosity for long-lasting protection against metal-to-metal contact. The proprietary AMSOIL additives form an iron-sulfide barrier coating on gear surfaces, providing the ultimate line of defense against wear, pitting and scoring. AMSOIL SEVERE GEAR® lubricants help prevent “thermal runaway” — a phenomenon caused by a lubricant’s inability to control friction and increased heat under high-stress conditions. By controlling thermal runaway, AMSOIL SEVERE GEAR® Synthetic EP Lubricants inhibit rapid lubricant degradation and component damage. Equipment runs better and lasts longer with AMSOIL SEVERE GEAR® Synthetic EP Lubricants.

AMSOIL Long Life Synthetic Gear Lubes are extended drain gear lubes engineered specifically to last several times longer and protect gears better than all conventional gear oils. These exclusive AMSOIL formulations of premium synthetic base oils and high performance additives resist acid, carbon and varnish formation from oxidative breakdown. Components run cleaner and last longer. AMSOIL Long Life Synthetic Gear Lubes are shear stable and friction reducing. They maintain their viscosity during extended service for maximum wear control and they are fuel-efficient. The superior cold temperature fluidity and high temperature stability properties of AMSOIL Long Life Synthetic Gear Lubes make them excellent for all-season use. Equipment lasts longer and maintenance costs are reduced with AMSOIL Long Life Synthetic Gear Lubes.

Specifically engineered for extended drain intervals up to 500,000 miles as set by equipment manfucaturers for over-the-road trucks and heavy equipment. Prevents wear and improves equipment life. Excellent "All Season" summer and winter performance. Outperforms all conventional gear oils. Also excellent for passenger cars and trucks. Compatible with most limited-slip differentials. Performance specifications include: API GL-5 & MT-1, MIL-PRF-2105E, Dana SHAES 234 (Formerly Eaton PS-037) for 250,000 miles, Dana SHAES 256 (Formerly Eaton PS-163) for 500,000 miles, Mack GO-J & GO-J+, Meritor 0-80, and Navistar TMS 6816 plus hypoid gear oil specifications from all domestic and foreign manufacturers such as GM, Ford and Daimler Chrysler. Can also be used in rear axles where API Service GL-4 lubricant is recommended.

AMSOIL 80W-90 Synthetic Gear Lube is a multi-functional product designed to surpass the requirements of equipment and automotive applications calling for an SAE 80W-90 viscosity grade. Formulated with wax-free synthetic base oils and high quality additives, AMSOIL 80W-90 Synthetic Gear Lube resists thermal breakdown. Its naturally high viscosity index and shear stable construction improves film strength and viscosity retention. AMSOIL Synthetic 80W-90 Gear Lube prevents wear, resists heat, and protects gears. It lasts longer in service than conventional gear oils and increases equipment life.

AMSOIL Synthetic 80W-90 Gear Lube provides:

• High Load Gear and Bearing Protection
• Longer Oil and Equipment Life
• Lower Maintenance Costs
• Compatibility With Conventional and Synthetic Gear Lubes
• Multi-functional for Multiple Applications

Formulated with advanced friction modifier. Designed to eliminate gear-housing chatter in cars, trucks and SUVs equipped with limited-slip, posi-traction and locking differentials. Formulated for use with both synthetic and petroleum gear lubricants and safely replaces manufacturer-recommended friction modifiers. In some differential applications, a friction modifier additive is necessary to reduce chatter. AMSOIL Slip-Lock Differential Additive is formulated with advanced friction modifiers and is designed to eliminate gear-housing chatter in cars, trucks and SUVs equipped with limited-slip, positraction and locking differentials. It also reduces the banging and clunking associated with automatic locking differentials.

AMSOIL Slip-Lock Differential Additive is formulated for use with both synthetic and petroleum gear lubricants and safely replaces manufacturer recommended friction modifiers. Its convenient flip-top dispenser provides quick and easy application to the gear housing. One four-ounce bottle of Slip-Lock treats differential capacities of two to four quarts. It is not for use in automatic transmissions or other applications requiring ATF.

AMSOIL 100% Synthetic 5W-30 Motor Oil (ASL) delivers extraordinary lubrication in all types of automotive gasoline engines. By combining the industry premier synthetic technology with AMSOIL premium additives, AMSOIL ASL exceeds the higher performance demands of modern engines. It withstands the stress of higher horsepower, higher heat and complicated emission control systems. AMSOIL Synthetic 5W-30 Motor Oil consistently outperforms competitive conventional and synthetic motor oils. It delivers long-lasting performance and protection.

AMSOIL Synthetic 5W-30 Motor Oil can extend drain intervals far beyond those recommended for conventional oils. Its unique synthetic formulation and long drain additive system are very stable, resisting oxidation and neutralizing acids. AMSOIL ASL delivers the best possible engine protection, cleanliness and performance over extended drain intervals, reducing vehicle maintenance and waste oil disposal costs. This product is designed to maximize energy efficiency for improved fuel economy. Unlike conventional oils, its uniform molecular structure helps it flow more freely and reduce friction between metal surfaces. Anti-friction additives are included to further improve energy efficiency.

European Car Formula Synthetic 5W-40 Motor Oil (AFL) is specially formulated for the lubrication needs of modern European gasoline and diesel cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks, premium additives and a 5W-40 viscosity rating, AMSOIL AFL is the preferred oil for virtually all European automobiles, especially turbo charged models. It is the only oil in North America to be recommended for the latest specifications of all three major European automakers - Volkswagen (Audi), BMW and Mercedes-Benz and the latest North American API specifications.

AMSOIL Synthetic European Car Formula contains high quality anti-wear additives and surpasses the tough ACEA oil specifications for high temperature/high shear viscosity. It provides outstanding protection in high RPM, hot running engines and delivers dependable long-term performance for the extended drain intervals set by European automakers. The broad 5W-40 viscosity rating, low volatility (burn-off) and wax free nature of AMSOIL Synthetic European Car Formula make it excellent for hot and cold temperatures. Engine wear is reduced, oil thickening is controlled and vehicles start easier in cold temperatures.

Passenger car and light-truck engines today are built for fuel efficiency and power. AMSOIL Series 2000 Synthetic 0W-30 Motor Oil optimizes efficiency and power without the sacrifice in wear protection that comes with many fuel-efficient, low viscosity oils. Testing shows that this product dramatically outperforms popular conventional and synthetic motor oils of typical viscosities in wear protection. AMSOIL Series 2000 Synthetic 0W-30 Motor Oil meets or exceeds the engine protection requirements of all domestic and foreign gasoline and diesel engines specifying the following:

• API SL/CF, SJ, SH
• ILSAC GF-2, GF-3
• ACEA A1/B1, A2/B2, A3/B3
• Chrysler MS-6395M
• Ford WSS-M2C-913A/B
• GM 4718M, 6094M
• VW 502.00 (HTHS is 3.4)
• DaimlerChrysler 229.5, 229.3
• JASO VTW

The number one choice for racers of all types of vehicles. Special synthetic base stock blend and advanced additive package provides up to four times the wear protection of other motor oils. Reduces friction for quicker engine response and increased horsepower. Engines in race cars, high-performance street cars, ATVs and motorhomes face high temperatures, vigorous engine speeds or heavy loads, each a potent stressor. This product is specially formulated to carry the oil's wear reducing and heat transferring agents to the engine's surfaces and hold them there. By positioning vital agents where they are most needed, Series 2000 provides a degree of engine protection unavailable with any other oil. It clings tenaciously to engine surfaces, so it shields engines from start-up wear. Further enhancing wear protection, the wax-free lubricating basestocks assure rapid post-start-up lubrication. Series 2000 also contains powerful corrosion preventives, detergents, dispersants and anti-foam agents to protect engines from the harmful effects of water, acids, debris, deposit-forming materials and air entrained oil.

AMSOIL 10W-30 delivers extraordinary lubrication in all types of automotive gasoline engines. By combining the industry premier synthetic technology with AMSOIL premium additives, AMSOIL ATM exceeds the higher performance demands of modern engines. It withstands the stress of higher horsepower, higher heat and complicated emission control systems. AMSOIL Synthetic 10W-30 Motor Oil consistently outperforms competitive conventional and synthetic motor oils. It delivers long-lasting performance and protection. This product can extend drain intervals far beyond those recommended for conventional oils. Its unique synthetic formulation and long drain additive system are very stable, resisting oxidation and neutralizing acids. AMSOIL ATM delivers the best possible engine protection, cleanliness and performance over extended drain intervals, reducing vehicle maintenance and waste oil disposal costs. It is designed to maximize energy efficiency for improved fuel economy. Unlike conventional oils, its uniform molecular structure helps it flow more freely and reduce friction between metal surfaces. Anti-friction additives are included to further improve energy efficiency.

Formulated for use in both gasoline and diesel engines. Offers multi-functionality and excellent wear protection. Ideal for applications where the extra protection of a higher viscosity oil is desired. Excellent for antiques, motor homes and older vehicles, as well as most types of modern equipment. Performance specifications include: API SL, CF & CI-4+

This product provides a wide range of protection in all four-cycle gasoline and diesel engines, including pickups, RVs, cars and off-highway vehicles. It is recommended for use in vehicles subject to stop-and-go driving, short trips, high temperatures, frequent trailer pulling and off-road use. Conventional motor oils tend to "boil off" in high temperatures, losing up to 25 percent of their original weight. These vaporized oils circulate poorly, reduce fuel efficiency and contribute to excessive emissions and engine wear. AMSOIL High Performance Synthetic 10W-40 Motor Oil resists vaporization. In fact, according to the NOACK Volatility Test, which measures the weight loss of an oil due to evaporation, AMSOIL High Performance 10W-40 only loses 7.0 percent of its weight in high temperature service, surpassing rigorous European standards set at 13 percent weight loss in high temperature testing. The superior vaporization resistance keeps engine wear, oil consumption and emissions to a minimum, while keeping oil circulation efficient and fuel economy high.

Formulated for use in both gasoline and diesel engines. Offers multi-functionality and excellent wear protection. Ideal for applications where the extra protection of a higher viscosity oil is desired. Ecellent for motor homes and older vehicles, as well as most types of modern equipment. AMSOIL High Performance Synthetic 20W-50 Motor Oil is specially formulated to provide superior protection and performance in the most demanding applications. It provides a wide range of protection in all four-cycle gasoline and diesel engines, including pickups, RVs, cars and off-highway vehicles and is ideal for use in high-stress vehicles subject to stop-and-go driving, short trips, high temperatures, frequent trailer pulling and off-road use.

SAE 60 Synthetic Racing Oil (AHR) is a high viscosity oil designed for high horsepower racing engines, typically supercharged and alcohol-burning or nitro-fueled, and requiring a high viscosity oil to resist the thinning effects of fuel dilution. Also ideal for motorcycles where SAE 60 motor oil is required. AMSOIL Synthetic Super Heavy Weight Racing Oil is formulated specifically for wear protection and friction reduction in the extreme service conditions of racing. It has been proven on-track to bring down high engine oil sump temperatures by 20 degrees F, which speaks directly to its ability to reduce friction, promote power and inhibit wear.

AMSOIL Series 3000 100% Synthetic 5W-30 Diesel Oil (HDD) delivers extraordinary lubrication in both diesel and gasoline engines found in commercial, fleet and personal vehicles. By combining the industry’s premier synthetic technology with AMSOIL premium additives, AMSOIL HDD exceeds the higher performance demands of modern engines. It withstands the stress of higher heat, higher acid levels and excessive soot loading found in EGR equipped engines. AMSOIL Series 3000 Synthetic 5W-30 Diesel Oil consistently outperforms conventional and synthetic diesel oils for long-lasting performance and protection. AMSOIL HDD can extend drain intervals far beyond those recommended for conventional oils. AMSOIL Synthetic 5W-30 Heavy Duty Diesel Oil is energy efficient for reduced fuel costs. Its low viscosity minimizes “drag” associated with high viscosity oils, allowing the engine to operate more freely, maximizing power and fuel economy. HDD stays fluid down to -60°F for improved cold temperature oil flow, reduced bearing wear and easier starting.

AMSOIL Synthetic Heavy Duty Diesel & Marine Motor Oil (AME) is a premium diesel oil providing excellent performance in all types of diesel engines where highly effective control of wear and deposits is vital. Built with heavy-duty dispersant/detergent additives, its 12 TBN chemistry neutralizes acids and controls soot thickening from EGR and blow-by to protect against corrosion, cylinder bore polishing (wear) and varnish/sludge deposits. AMSOIL AME resists heat and breakdown better than conventional petroleum oils for long lasting performance and protection. AME remains fluid down to -51°F. It eases cold weather starting and provides vital start-up lubrication to prevent engine wear. AME outperforms conventional 15W-40 petroleum oils and greatly minimizes the impact of cold weather operation.

AMSOIL Synthetic Blend 15W-40 Heavy Duty Motor Oil (PCO) features a dual-base of premium synthetic and hydro-processed base oils in formulation with proven high quality anti-wear additives. This multi-use oil is designed for both heavy-duty diesel engines (including modern EGR units) and gasoline engines, combining versatility and heavy-duty engine protection into one cost effective motor oil. It is formulated with high levels of dispersant and detergent additives that effectively control acids and soot thickening to prevent corrosion, wear and deposits. AMSOIL Synthetic Blend 15W-40 Heavy Duty Motor Oil is excellent for all season use in on or off road applications.

AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD) is formulated with premium synthetic base oils that exceed both 10W-30 multi-grade and SAE 30 straight-grade viscosity requirements for outstanding performance in modern and older diesel engines. Unlike conventional SAE 30 motor oils, AMSOIL ACD has a naturally high viscosity index and does not contain paraffin (wax). It has a -36°F pour point and qualifies for SAE 10W, making it an “all season” multi-grade lubricant with a wide operating temperature range. AMSOIL ACD is formulated without viscosity index improvers (VI). This shear stable formulation stops viscosity loss and associated bearing and cylinder bore wear. AMSOIL ACD contains premium additives with a high 12 TBN to neutralize acids from blow-by, exhaust gas recirculation (EGR) and high sulfur diesel fuels. It protects against damaging piston deposits, ring sticking and sludge.

Ultimate protection for hard-driven, high performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high- and low-temperature performance. Outperforms other conventional and synthetic greases. AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications. AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for high-temperature/high-speed applications. Yet, it excels in the protection of low-speed bearings, a job usually reserved for heavy-duty products. Components get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose.

Multi-Purpose NLGI #2 GC-LB Extreme Pressure Fortified. Superior lubrication and protection in automotive and industrial applications with extensive exposure to water. AMSOIL Synthetic Water Resistant Grease is an extreme-pressure, multipurpose grease formulated specially for wet-duty performance. Its water washout and sprayoff resistance are ideal for wheel bearings of motorcycles, vehicles and trailers frequently exposed to water, mud, snow or ice.

Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles, heavy equipment pivot joints and other components operating in high-load, low-speed conditions. NLGI #1 is preferred for cold temperatures and auto pumping systems. Offers excellent water washout resistance. AMSOIL Heavy Duty EP Grease is formulated with a top performing lithium complex thickener system that provides excellent water resistance as identified by the ASTM D-1264 water washout test. AMSOIL Heavy Duty EP Grease adheres to metal and is shear stable during severe mechanical activity, maintaining consistency and providing superior lubrication protection.

Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles, heavy equipment pivot joints and other components operating in high-load, low-speed conditions. Offers excellent water washout resistance. AMSOIL GH Greases in grades #1 and #2 are recommended for use in manual or automatic lubricating systems. NLGI #1 (GHB) greases have better mobility and are the preferred choice for colder applications, for automatic lubrication systems with long pumping runs, and for gear box applications (where recommended by manufacturer). NLGI #2 (GHD) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, high water environments, and is the primary choice for wheel bearings.

Reduces friction and wear in high-speed, high-temperature components such as automotive wheel bearings and electric motors. Keeps components running clean and trouble free for outstanding performance and long-life. NLGI #0 and NLGI #1 greases have better mobility and are preferred for cold temperature and automatic pump systems. NLGI #2 is the primary wheel bearing recommendation. AMSOIL GLC multi-purpose, EP grease is qualified against the highest grease standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. GLC Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

The same great AMSOIL Synthetic Multi-Purpose Grease in a convenient spray formulation. Ideal for greasing hard-to-reach equipment such as hinges, springs and other common applications. AMSOIL GLC multi-purpose, EP grease is qualified against the highest grease standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. GLC Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

Do you have an engine or other lubricated machinery that runs intermittently or operates at a steady speed in a clean environment and wonder if your periodic maintenance is wasting time and oil? Do you have an expensive piece of equipment that simply can not "go down" or one that needs to be monitored closely? The answer to these situations is AMSOIL oil analysis services.

By analyzing used engine oil, a qualified lab can detect mechanical problems BEFORE they take you down or cause other major problems. Periodic oil analysis reveals the wear trends and often enables you to identify which component is failing - and possibly even "why". Monitoring wear trends enables early detection of internal abnormalities. Because machines of the same type will accumulate contaminants and wear at different rates, performing trend analysis on each machine is the most effective method of giving you an internal look at your equipment. It enables you to deal with developing problems before they become catastrophic situations. Oil Analysers system makes it easy to collect a good oil sample and an accurate condition report. Simply follow the proper sampling procedures provided. Sample kits are available as Postage-Paid and Non-Postage-Paid kits.

A common question that arises is "how often should I change oil in this machine over here". Clearly, the correct oil change intervals for a premium lubricant like Amsoil may vary from engine manufacturer guidelines which assume the use of a mineral oil. Amsoil has developed a handy printed guide in the form of a PDF file to assist you.

Penetrates deeply into fabric pores to lift out imbedded dirt. No need for heavy scrubbing. Simply spray on, allow a minute or two to penetrate and loosen dirt particles, then wipe off with a damp cloth or sponge. Prepares fabric for conditioning with Pro-Formula Vinyl and Leather Protectant.

Seals and protects vinyl, rubber, plastic and finished wood surfaces. Protects against fading, cracking, drying, deterioration and oxidation caused by exposure to the sun. Provides long-lasting protection.

AMSOIL INC. has once again expanded the BriteSide™ product line with a new hand cleaner that delivers both exceptional cleaning power and the convenience of water-free application. Heavy Duty SCRUB Hand Cleaner is the perfect cleaner for the shop, garage or home. Dozens of hand cleaner products currently available on the market are nothing more than simple soaps that are only capable of removing surface dirt. These soaps cannot effectively remove oils, greases and other complex chemicals from the skin, and almost all require frequent reapplication and the assistance of water washing. Others include high amounts of pumice, which can effectively remove oils and greases from the skin, but does so only after repeated harsh abrasive exposure. SCRUB contains no abrasive pumice. The unique formulation dissolves and assimilates oils and greases on hands as soon as it is applied, and requires little or no rubbing action to remove the substances.

This unique dry motorcycle wash and polish delivers outstanding performance and quick, easy and economical spray application. No water required. Incredibly easy to use: simply spray on, use a clean terry cloth towel to spread Miracle Wash and wipe clean with a second terry cloth towel. It's simply the fastest way to clean your cycle. Specially formulated surfactants lift dirt and other particles from the surface of your bike and hold them in suspension. Miracle Wash then acts as a shield, protecting the surface from abrasion while you wipe the dirt clean. Repels dust and light dirt particles and protects against the sun's ultraviolet rays. No more applicator bottles. No more re-filling. And no more pumping. Simply apply Miracle Wash using the aerosol spray can, work around with a towel and let the surface dry to a haze. Buff with a clean towel until the haze is removed and wipe away to leave your bike with a fantastic shine and a super tough protective finish.

BriteSide® T6 Cleaning Concentrate - "Absolutely the Strongest Cleaner You'll Ever Use" Now, every cleaning chore – in the house, garage and yard – can be done with one concentrated cleaner. Introducing BriteSide T6 Cleaning Concentrate, a revolutionary new formula that tackles the toughest cleaning jobs, yet, when diluted with water, is safe and effective on nearly every surface or material. The name, BriteSide T6 (Task six) Cleaning Concentrate, represents six categories of application that encompass virtually all cleaning chores.

BriteSide® Scrub With Pumice
Works just like original Scrub when it comes to cleaning - with the added cleaning power of pumice. Cuts through grease, oil and dirt. Specially designed container is self-dispensing. Use with or without water rinse.

BriteSide® Car Polish (PCP)
Goes on easy and produces a brilliant mirror-like shine with only light hand-buffing. Provides UV protection to prevent paint from fading. Safe for all types of paint, including clearcoat. Anti-static formula minimizes dust accumulation.

BriteSide® Metal Polish (PFM)
Cleans, polishes and protects chrome, aluminum, brass and stainless steel surfaces. Forms a protective layer that inhibits future rust and oxidation.

AMSOIL Synthetic Automatic Transmission Fluid (ATF) exceeds the performance requirements for domestic and foreign automatic transmission fluid applications. AMSOIL ATF provides automatic transmissions, power steering units and hydraulic equipment with excellent lubricating protection and better performance over a wider temperature range than conventional automatic transmission fluids. AMSOIL ATF resists thermal and oxidative degradation better than conventional transmission fluids, protecting clutches, planetary gears, valves, pumps and seals from damaging sludge and varnish deposits.

AMSOIL ATF helps prevent component overheating and ensures cooler, smoother transmission operation. It also outperforms petroleum fluids in low temperature fluidity. In fact, AMSOIL ATF offers twice the cold temperature fluidity required by current automatic transmission fluid specifications. AMSOIL ATF provides easier starting, faster warm-ups, smoother shifting and improved fuel economy. Beside providing smooth shifting, the antiwear additive package makes AMSOIL ATF an excellent lubricant in other hydraulic systems.

In tests designed to measure wear characteristics under severe service and high pressure operating conditions, AMSOIL ATF far exceeds the requirements of hydraulic equipment manufacturers. AMSOIL ATF is a stable formulation that lasts longer in service than conventional ATFs. It maintains its viscosity, friction and lubricating properties for extended periods of time, even under severe conditions. AMSOIL ATF maximizes transmission performance and service life while reducing maintenance costs through longer drain intervals.

Torque-Drive™ Synthetic is engineered to eliminate the deficiencies common to all conventional, petroleum ATFs, AMSOIL Torque-Drive™ provides superior performance and protection against thermal and oxidative degradation, sludge and varnish formation, viscosity shear down, cold temperature oil thickening, poor friction stability, high component wear and shortened oil life. Automatic transmission operating expenses can be directly linked to transmission fluid quality. Poor quality oils need frequent changes and they reduce the effective service life of transmissions. Delivering the ultimate in oxidation resistance, wear control and friction performance, AMSOIL Torque-Drive™ extends lubricant life up to six times* and provides protection beyond that possible from conventional ATFs. Vehicles stay on the road longer, unnecessary labor and maintenance costs are reduced, and the return on costly transmission investments is maximized. Immediate financial benefits are realized upon the installation of AMSOIL Torque-Drive™. Recommended for use in applications specifying Allison® TES-295 or C4, DEXRON® III, MERCON®, ZF® TE-ML 14C

Super Shift® Racing Transmission Fluid is formulated for high horsepower and high torque applications. This product is specifically formulated for automatic transmissions operating in high horsepower and high torque conditions. AMSOIL Super Shift® contains top quality additives selected specifically for racing applications. Its unmatched transmission friction performance provides high holding capacity for maximum torque transfer and brake power, reduced wear and longer clutch plate life. Super Shift® virtually eliminates slippage, promotes positive clutch engagement and improves overall shift performance, helping racers improve on elapsed times. Spec'd for Allison C-4 and Ford Type F.

AMSOIL Synthetic Super Shift® Racing Transmission Fluid is highly effective against heat and wear, reducing transmission temperature and minimizing or eliminating burned up transmissions. Its superior oxidative and thermal stability inhibits the formation of varnish, deposits and sludge so equipment runs clean. Super Shift® acts as a heat transfer fluid and by controlling clutch slippage it helps reduce operating temperatures of hot transmissions by up to 50° F. In low temperatures, Super Shift® flows readily for dependable startup and poststartup protection. AMSOIL Synthetic Super Shift® Racing Transmission Fluid protects equipment from copper corrosion and rust, even during equipment storage. It controls foaming for reduced component wear and responsive clutch plate engagements.

RECOMMENDATIONS
AMSOIL Synthetic Super Shift® Racing Transmission Fluid is recommended for automatic transmissions coupled to high horsepower, high torque engines. It is also recommended where heavy loads place a high demand on transmissions. Recommended where Allison C-4 or Ford Type F is required. Suggested automatic transmission applications:

• Drag Racing Cars and Trucks
• Monster Trucks
• Stock Cars
• Off Road 4x4 Vehicles
• Street Hot Rods

AMSOIL Synthetic Synchromesh Transmission Fluid (MTF) is a premium quality synthetic lubricant designed to surpass the most demanding lubrication requirements of manual transmissions and transaxles where non-extreme pressure fluids are used. MTF protects gears and bearings in extreme temperatures. It outperforms conventional oils and delivers outstanding performance from -40°F to 300°F. It maximizes energy efficiency and resists the effects of heat, oxidation, sludge and varnish deposits.

Unlike its mineral oil counterparts, MTF prevents the thinning effects of mechanical shear for stable viscosity, superior film strength and anti-wear performance. It protects against rust, keeps seals soft for long life, and is compatible with brass synchros for smooth synchromesh shift quality. Recommended for automotive and light truck applications that require synchromesh transmission fluid. Applications include manual transmissions and transaxles such as New Venture NV T350, NV 1500, NV 2550, NV 3500, NV 3550, NV 5600, and Tremec T4, T5, T18, T56, T176, TKO500, TKO600, TR 3450 and TR 3550. Replaces MTF-94 fluid for Land Rover, MG, and Mini Cooper. Replaces Honda Genuine MTF fluid for manual transaxles and Texaco MTX fluid.

Not for use in engines or wet clutch applications. Specifications include:

• GM 9985648
• GM 9986105
• GM 9985535
• Chrysler MS-9224
• Chrysler MS-9417

• GM 12345349 or 12345577
• GM 12377916
• GM 1052931
• Chrysler 4874464
• Chrysler 4874465

Recommended for 50,000-mile service intervals or longer (up to 150,000 miles) as indicated in the owner’s manual.

Synthetic Manual Transmission & Transaxle Gear Lube is specifically formulated for the most demanding manual transmission and transaxle applications. It is a premium blend of the finest synthetic base oils and advanced, high-performance additives. It is formulated specifically for maximum protection in the most demanding manual transmission and transaxle applications where an extreme pressure GL-4 gear lube is specified, including those where high horsepower/high torque engines and towing or heavy loads increase transmission stress.

AMSOIL MTG prevents the thinning effects of mechanical shear. It maintains its viscosity and superior film strength for consistent, long-lasting wear protection. MTG excels in hot and cold temperature extremes that exceed the limits of conventional mineral oils. It protects against rust, keeps seals soft for long life, and is compatible with brass synchros for smooth synchromesh shift quality. Ideal for NV-4500 Transmissions. MTG is a thermally stable, extreme pressure formulation that resists heat, oxidation, acid build-up and varnish. It is the ideal gear lube for high temperature applications, including the New Venture NV-4500 transmission, which retains heat due to its cast iron housing and is often subjected to heavy loads and high torque from turbo-diesel engines. AMSOIL MTG is the replacement fluid for GM part #12346190 and Chrysler part #4874459 (Chrysler specification #MS-9070).